2.1.4 Static Alarm
The Static Alarm is designed as a simple multi function alarm monitor.
N.B.
For correct Static Alarm functionality the Normally closed Switch must be connected
to ground, otherwise the unit will always be in a
static condition
.
In the above example both the normally closed and the normally open switch are connected to
switches to ground, this is the simplest configuration.
2.1.4.2 Static Notifications
The device monitors alarm events via the normally open and normally closed switches.
If there is a static event then the user is sent a SMS text and the GPRS Server is updated with
the static event
2.1.4.3 Set Alarm Zero
This is used to bypass the Static Alarm circuitry. By default there is a 12 second delay in the
Static alarm trigger, in that time if the set alarm zero pin is held at +ve then the static condition
will be bypassed.
This is useful if the owner of the vehicle gets into thier car and turns the Ignition on within 12
seconds.
Summary of Contents for Tiso-19
Page 1: ...Tiso 19 Tracker Hardware Guide...
Page 4: ...1 3 Wiring Overview...