Electric Oven
User Manual
Page
7
Installation
WARNING:
The rules about electrical local standards must be adhered to during product
installation.
WARNING:
Check for any damage on the product before installing it.
Do not have product installed if it’s damaged. Damaged products pose danger for your
safety.
Important Warnings for Installation:
Cooling fan shall take extra steam out and prevent
outer surfaces of appliance from overheating during
operation of oven. This is a necessary condition for
better appliance operation and better cooking.
Cooling fan shall continue operation after cooking is
finished. Fan shall automatically stop after cooling
is completed.
A clearance must be left behind the enclosure where
you’ll place the appliance for efficient and good
operation. This clearance shouldn’t be ignored as
it’s required for ventilation system of the appliance
to operate.
Right Place For Installation
Product has been designed to be mounted to worktops procured from market. A safe
distance must be left between the product and kitchen walls or furniture. See the drawing
provided on the next page for proper distances. (values in mm).
• Used surfaces, synthetic laminates and adhesives must be heat resistant. (minimum 100°C).
• Kitchen cupboards must be level with product and secured.
• If there is a drawer below the oven, a rack must be placed between oven and drawer.
WARNING:
Do not install the product next to refrigerators or coolers. The heat emitted by
the product increases the energy consumption of cooling devices.
WARNING:
Do not use door and/or handle to carry or move the product.
Figure 1
