EN - 15
7. THE CONTROL PANEL
Selection knob to the 'Off' position. During
a delay, the light corresponding to the
remaining time is switched on.
7.1. Changing a Program
Follow the steps below to change a
program while in operation.
Rotate the Program Selection Knob
(
3
)
to switch the machine on and select
suitable program for your dishes. When the
knob is in the 'Off' position, the machine
will
not operate.
Press the Start/Pause button (
2
) to start
the selected program. The Start/Pause
light will switch off and the Wash light will
illuminate. If the door of your machine is
opened while a program is in operation, the
Start/Pause light will flash.
NOTE:
Press and hold the Delay
button (
1
) for 3 seconds to activate the Half
Load function, which shortens the duration
of a program. Press and hold the button
again for 3 seconds to cancel it.
NOTE:
If an extra feature is used,
such as the Delay or Half Load, (
1
) on the
most recent wash program, this feature
will
remain active on the next selected program.
To cancel this feature on the newly selected
wash program, turn the Program Selection
Knob to the 'Off' position, then turn the
machine on. Extra features can be activated
with the newly selected program.
Delaying the Program
Press the Delay button to delay the start
time of a program for 3, 6 or 9 hours.
Pressing the button once will delay the start
time for 3 hours, pressing twice will delay for
6 hours, and pressing a third time will delay
the start time for 9 hours. If the button is
pressed for a fourth time, there will be
no
delay. Press the Start/Pause button to
activate the delay. The program can be
selected first and the delay time after, or
vice versa. To cancel or change the delay
time, press the Start/Pause button first, then
select a new delay time. The delay times
can be cancelled by turning the Program
Press the Start/Pause button.
After the program stops, select
a new program using the
Program Selection Knob.
Press the Start/Pause button
to start the newly selected
program.
The new program will
resume the course of the
old program.
