pg
8
www.tisira.com
| tisira
installation
SELECTION OF INSTALLATION EqUIPMENT
Cut out the work surface according to the sizes shown in the drawing. For the purpose of
installation and use, a minimum of 50mm space shall be preserved around the hole.
be sure the thickness of the work surface is at least 30mm. Please select heat resistant work
surface material to avoid deformation caused by the heat radiation from the hotplate.
L
W
H
d
A
b
X
900
520
55
750
495
50
under all circumstances, make sure the ceramic cooker hob is well ventilated and the air
inlet and outlet are not blocked. Ensure the ceramic cooker hob is in good working state.
NOTICE //
The safe distance between the hotplate and the cupboard above the hotplate should
be at least 760mm.
A
B
C
D
E
760 Min 50
Min 20 Air intake Air exit 5mm
BEFORE LOCATING THE FIxING BRACKETS
The unit should be placed on a stable, smooth surface
(use the packaging).
Fix the hob on the work surface by screw four brackets on
the bottom of hob. (see picture) after installation.
TCT90-UM130513_F.indd 8
13/05/13 3:39 PM
51
