Quick Start
Washing Method
water to the wash tub
2.
3. Set wash program “
” or “
” as per amount and texture of laundries.
4. Turn the wash timer knob to set wash time.
1. Insert the
inlet hose into the
, and choose injecting
water
water inlet mouth
.
Put the laundry into the wash tub, and add detergent into it.
When fill water to half of the desired water level, turn off the
water tap and let laundries soak in the solution for minutes,
then fill water to desired water level.
Gentle
Normal
5. After washing, set the wash drain selector to “Drain” position for draining.
Wash timer
Rinsing Method
A. Spraying rinse (rinse in the spin tub)
①
②
③
④
Put the laundry into the spin tub after washing.
Turn on the water tap, choose to fill water into the spin tub for 3-4 minutes, and then turn off the water tap.
The above steps can be repeated.
Set the spin timer for 2-5 minutes for rinsing.
Note:
If there is red rust in water, do not choose spraying rinse, for the rust is easy to adhere to
laundries.
Ensure that do not fill water into spin tub when spinning.
①
②
-7-
-6-
1. Install the washing machine
2. Load the laundry
3. Add detergent and water
into the wash tub
4.
to set wash time
Turn the wash timer knob
5.
“Drain” position after washing
Set the wash drain selector to
7. Move the laundry into the spin
tub and close the spin cover
8.
to set spin time
Turn the spin timer knob
6. Repeat the steps 3-5 for rinsing
9.
the spin tub
Take out the laundry from
USAGE METHOD
Water level indicator
①
To save time, water and energy, can do pre-spinning before rinsing.
②
Put laundries which have already been dehydrated into the wash tub.
③
After filling water to the desired level, turn off the water tap to save water.
④
Turn the “Wash selector” knob to the “
” or “
”.
⑤
Set the “wash timer”to the desired time (about 3-5 minutes)for rinsing.
⑥
After rinsing, put the washing materials into the spin tub to spin for 1 to 5 minutes.
⑦
Drain out the rinsing water in the wash tub.
⑧
The above steps can be repeated.
Gentle
Normal
Spin timer
B. Common rinse (rinse in the wash tub)
Spinning Method
Spin cover
Safety cover
Spin timer
1.Shake out the laundry and put
them into the spin tub.
2.Put the inner spin cover on
.
Confirm the inner spin cover is placed
horizontally.
the laundry
3.Close the safety cover and the
spin cover.
Correct
Incorrect
Inner
spin cover
Spin tub
4.Refer to the following table to select
spinning time.
Washing materials
Silk
Light clothes
(fiber/blended)
Knitwear (fiber)
Underwear
(cotton)
Slipover
(cotton/linen)
Toweling coverlet
(cotton)
About 50
seconds
About 1
minute
About 1
～
2
minutes
About 2
～
3
minutes
About 3
～
4
minutes
About 5
minutes
Spin time
USAGE METHOD
The tests were carrid out under program
Normal
. Below is the detail for test seting and steps;
1.
Main
wash:
30
min., H0
water
level,
wash
temperature
40
º
C;
2. Spin: 3
min., 2
times;
3kg/3.5kg
test
load
for
one
turn;
3.
Rinse: 3
min., M
water
level,
water
temperature
20
º
C;
4.
Spin: 3
min., 2
times;
3kg/3.5kg
test
load
for
one
turn
.
(For efficiency program only )
Efficiency Program
H0
