InSTallaTIon Manual
TIS conTRol lIMITeD
RM 1502-p9 Easey CommBldg
253-261 Hennessy Rd Wanchai
Hong Kong
TeXaS InTellIGenT SYSTeM llc
SUITE# 610. 860 NORTH DOROTHY DR
RICHARDSON
TX 75081.USA
copyright © 2020 TIS, all Rights Reserved
TIS Logo is a Registered Trademark of Texas Intelligent System LLC in the
United States of America. This company takes TIS Control Ltd. in other
countries. All of the Specifications are subject to change without notice.
w w w . t i s c o n t r o l . c o m
TIS TITan/TITanIa 2-4 GanGS Touch Panel
9
Model: TIT-2G-BUS-K, TIT-3G-BUS-K, TIT-4G-BUS-K
TIT-2G-BUS-S, TIT-3G-BUS-S, TIT-4G-BUS-S
TRouBleShooTInG
The panel’s buttons blinks
rapidly.
Reason:
The panel address conflicts with another
device in the TIS network. You need to select and
hold the Page Layout button for 6 seconds so that
the panel can get a new address.
The panel buttons’ LEDs
do not turn ON, and the
device is not powered.
Reason 1:
There is no TIS-BUS power or no
connection to the L/N input (if used AIR bus-3W
converter).
Reason 2:
The TIS 24V power supply is not
connected to the TIS-BUS.
The wall panels fail to pair
with other devices.
Reason 1:
The TIS-BUS connection has a
problem, or the wire has a short circuit.
Reason 2:
The manual programming function is
disabled on the device (it is enabled by default).
The wall panels fail
to control the device
channels.
Reason 1:
The TIS-BUS connection has a
problem, or the wire has a short circuit.
Reason 2:
The programming address is faulty.
