14
INSTALLATION MANUAL
Model: TIS-AVIP-MTX44
TIS CONTROL LIMITED
RM 1502-p9 Easey CommBldg
253-261 Hennessy Rd Wanchai
Hong Kong
TEXAS INTELLIGENT SYSTEM LLC
SUITE# 610. 860 NORTH DOROTHY DR
RICHARDSON
TX 75081.USA
Copyright © 2021 TIS, All Rights Reserved
TIS Logo is a Registered Trademark of Texas Intelligent System LLC in the
United States of America. This company takes TIS Control Ltd. in other
countries. All of the Specifications are subject to change without notice.
w w w . t i s c o n t r o l . c o m
AV MATRIX 4X4
RS232 PASS THROUGH
By RS232 Command, the matrix can send RS232 data to control the receivers. The
receiver can also send RS232 data to control the Matrix.
Please refer to the command list included in this document.
RS232 ONLINE UPGRADING FIRMWARE
ࣶ
1) Use serial port upgrade, and the host dial code is pre- adjusted to the right to enter the serial port
upgrade mode;
ࣶ
2) RS232/Micro USB connection computer and product, open special upgrade software, click “Refresh”
to make serial number Refresh;
ࣶ
3) COM port to choose the port connected with the product;
ࣶ
4) The baud rate setting is consistent with the host baud rate (default 115200);
ࣶ
5) Upgrade instructions in the upgrade instruction box (some instructions are as follows);
▸
A1 means MCU;
▸
C0 means CPLD;
▸
F0 means HTML.
ࣶ
6) Click on the “...”Select the upgrade file for download;
ࣶ
7) Click “Update” and the system starts to upgrade;
ࣶ
8) The updated information box will prompt “Succeed” information when the upgrade is completed, and
the representative program has been upgraded successfully.
