InSTallaTIOn Manual
MODEL: IO-8G
TIS CONTROL LIMITED
RM 1502-p9 Easey CommBldg
253-261 Hennessy Rd Wanchai
Hong Kong
TEXAS INTELLIGENT SYSTEM LLC
SUITE# 610. 860 NORTH DOROTHY DR
RICHARDSON
TX 75081.USA
Copyright © 2020 TIS, All Rights Reserved
TIS Logo is a Registered Trademark of Texas Intelligent System LLC in the
United States of America. This company takes TIS Control Ltd. in other
countries. All of the Specifications are subject to change without notice.
w w w . t i s c o n t r o l . c o m
8-GanG PuSh-buTTOn Panel
16
TROubleShOOTInG
The panel’s buttons
blinks rapidly
Reason:
The panel address conflicts with another
device in the TIS network. You need to press and hold
any push button for 6 seconds so that the panel can
get a new address.
The panel buttons’
LEDs do not turn ON,
and the device is not
powered
Reason 1:
There is no TIS-BUS power or no connec-
tion to the L/N input (if used AIR bus-3W converter).
Reason 2:
The TIS 24V power supply is not connect-
ed to the TIS-BUS.
The wall panels fail to
pair with other devices
Reason 1:
The TIS-BUS connection has a problem, or
the wire has a short.
Reason 2:
The manual programming function is dis-
abled on the device (it is enabled by default).
The wall panels fail
to control the device
channels
Reason 1:
The TIS-BUS connection has a problem, or
the wire has a short.
Reason 2:
The programming address is faulty.
The backlite display
on some buttons is the
wrong color if the light
is turned ON/OFF
Reason:
Software LED backlite setting has been
changed. Please program it to show the correct color.