Retrigger input explained
In its classical use, the retrigger input is there to provide retriggering of the envelope when used
with CV/Gate keyboards playing legato notes. In this case, the envelope will retrigger even if it is
in the ON state, providing an accent effect to the new note that had been played.
But the use of the retrigger doesn't end there: using pulses other then the gate input signal will
give an extra cycle of the attack segment, this can be very musical and fun to play with. Use clock
dividers or any other pulse source to experiment.
Reverse Polarity Protection
How annoying it is to lose a module due to reverse plug-in? The Z4000 is totally immune to that;
no matter how you are going to hook it up, it will not cause it to burn. This protection is infinite,
meaning that even if you keep it connected in the wrong way for very long time, there will still
be no issues and no overheating or damaging of the module or the power supply.
We hope you will enjoy your Z4000, it’s an analog envelope made with love.
http://tiptopaudio.com/z4000-ns/
Summary of Contents for Z4000
Page 1: ...www tiptopaudio com...
