Tiptop Audio QuantiZer, Manual, Page: 8 / 13

Slider: a 40mm pot for inputting the following data:
- Notes outputs a quantized pitch directly to the 1V/Oct output. The entire 5 octave ranges
is available via the slider.
- Portamento sets the slew rate between notes. The slewed output is not quantized in
between the input notes for smooth pitch bend effects.
- Transpose inputs the amount of transpose from 0 to 12 semitones. The transpose amount
is in semitones.
- Octave shifts the output up from 0 to 4 octaves.
- Input range selects the input range: 0-5V, 0-10V and +/-5V
Scale selection buttons: Press once to enable the scale type and then select the scale using
the keyboard (for A minor press Minor button then the A button on the keyboard, etc). Avai-
lable scales:
- Major selects a scale corresponding to the Western Major scale.
- Minor selects a relative Minor scale.
- S1 is the first bank of 12 user scales.
- S2 is the second bank of 12 user scales
Note that the Scale CV overrides the manual selection of a scale, so disconnect the Scale CV
input or send 0V to it.
Editing Scales:
-
Change the Keys mode to ‘Scale Edit’
- Select S1 or S2
- Add or Remove Notes from the Scale
- Scales need to be saved using Save in the Input Range mode of Keys to be recalled on the
next power up
Record buttons:
- Record has three states:
- Off where the Note CV is directly sent to 1V/Oct,
- On where the Note CV is recorded using the Keyboard and Slider
- Play where each clock plays recorded values from memory
Reset sets the record or playback to the first position in memory
Clear erases all of the recorded values in memory when held
Force 0V disables all Quantization and sends 0V to the 1V/Oct output. This is used for calibra-
tion and tuning of 1V/Oct devices.