manualshive.com logo in svg

Tiptop Audio CIRCADIAN RHYTHMS, User Manual

Share
Download
Tiptop Audio CIRCADIAN RHYTHMS User Manual Download Page 45

43

Startup functions

Updating the CR Firmware

From time-to-time, Tiptop releases firmware updates to some of its modules including the CR. The-

se firmware updates include changes to the hardware that fix bugs as well as add new features or 

improve current features. Firmware updates are applied to the CR via a USB flash drive (memory 

stick) connected to the USB port on the module back.

The CR features a USB type A port that hosts USB 1.0 and 2.0 devices. Any flash memory device 

can be used, but the CR only recognizes a drive formatted in the MS-DOS FAT32 format. This is the 

default format of most USB flash drives and SD cards out of the box, so no need to reformat unless 

the drive was formatted to something like the Mac HFS or Windows NTFS format.

(Note: the power draw of an external IDE/SATA drive is too much for the CR to support, so don’t plug 

in an external USB hard drive of this type.)

To load the firmware on to your USB device:

• Download the firmware file from the Tiptop site

• Copy the file onto the root level of your USB drive. The downloaded firmware file is

called image.hex and the CR will only recognize files with this name.

Follow these remaining steps to update your CR:

• Power down the CR and unscrew from rack

• Insert the USB flash drive into USB port on the back side of the CR

• Hold down the Vertical button on the lower right

• While continuing to hold down the Vertical button, power on the CR

• Firmware update takes about 5 seconds and the Swing LED will light

• Once the firmware is updated the CR will boot normally

• Remove USB drive and reinstall the CR into rack

It is sometimes recommended to erase the internal memory after firmware upgrade. Here is how 

you do that:

Clearing the Internal memory

The internal memory that holds all data and settings while power is off can be reset if desired. Hold 

the Zoom button down on power up and the memory will be set to default values.

Checking Firmware Version

To display the current firmware version, Press the Global button while in Vertical View. Once the 

display changes to Global View, press the A button (seventh button in the Group Column) and the 3 

digit firmware version will display for a few seconds.

Summary of Contents for CIRCADIAN RHYTHMS

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands