Quick Installation Guide
15
Up0 system telephones
Up0 system telephones can only be connected to tiptel.comPact 84 Up4 / Rack at
the expansion module which has been installed as factory default. At each Up0 port
you may operate one Up0 system telephone.
With tiptel.com 822 XT / Rack for operating Up0 system telephones the optional
module tiptel 4S0/Up0 is available.
Analogue telephones
With tiptel.com 822 XT and tiptel.comPact 84 Up4 analogue telephones can only be
connected by using telephone installation cable and connecting them to the terminal
strip row, connectors P1 to P8. For each extension lines a and b are available which
have to be connected with connectors 1 and 2 of a telephone wall outlet.
With tiptel.com 822 XT Rack and tiptel.comPact Up4 Rack connection of analogue
telephones is made via connectors a/b 1-8, which are 8-pin RJ 45 western jacks to be
used for wiring via a patch panel. With each jack only the centre pins 4 and 5 are be-
ing used.
As factory preset the extension numbers 50 - 57 are assigned to the analogue exten-
sions 1 - 8.
Network
You can connect one of the connectors LAN 1 - LAN 4 to the LAN port of your PC or
to a LAN port of your internet router or your Ethernet switch.
Now you may plug in the AC adapter of your telephone system into a power outlet.
Connection test
You may test the correct connection by picking up the handset of a telephone. Now
dial extensions 50 to 57 which should cause the connected analogue telephones to
ring. When dialling extensions 20, 21 or 30, 31 or 40, 41 the ISDN or S
0
system tele-
phones should ring.
To place a call to an external subscriber you must use 0 (zero) as prefix before the
real telephone number. External access by using 0 as prefix may be deactivated in
the configuration of the telephone system.
