Initial use
9
To insert the
SIM card, a memory card and the battery, the casing
cover at the back of the device must be removed. Press the casing
cover and sliding it downward until it can be removed (Fig. 1).
Carefully install the SIM card in the card holder. Push the SIM card
under the metal clamp with the contacts pointing downwards and the
notch facing the SOS button (Fig. 2).
To insert an SD memory card, push the metal clip towards the key-
pad lock switch, and fold it upwards (Fig. 3). After inserting the card
and closing the metal holder, push the holder towards the Radio
switch such that it secures the card and can no longer be opened
upwards. Exercise extra care here. If the metal holder does not slide
easily, it is usually an indication that the card is not inserted correctly.
The battery is inserted next (only possible in the correct position - Fig.
4).
Then replace the case cover and slide it towards the SOS button until
it clicks into place.
Switching on the telephone
To switch on the phone, press the red hang-up button
for about
3 seconds.
You are then prompted to enter the SIM card PIN (if enabled for the
SIM card). Use the keypad to enter the PIN and then press the left
display button
(OK).
Note:
In "Settings"
"Security Settings", you can change the
SIM card PIN and enable/disable the prompt.
Setting date and time
After switching on for the first time (and when the battery is removed
for longer periods), the telephone automatically synchronises date
and time from the service provider network.
Summary of Contents for Ergophone 6070
