TIPTEL Ergophone 6020, User Manual

Page: 9 / 56

Bringing into service
9
To insert the SIM card, any memory card and the battery, the casing
cover at the back of the device must be removed. Press the casing
cover while sliding it downward until it can be removed (illustration 1).
Slide the metal catch toward the top of the device, then fold open
upward (illustration 2).
Carefully install the SIM card in the card holder. After the card is in-
serted, the metal holder is pushed forward, so that it secures the card
and can no longer slide upward (Illustration 3). Exercise extra care
here. When the metal holder does not slide easily, it's usually an indi-
cation that the card is not correctly inserted.
Next, the battery is inserted, which is only possible in the correct posi-
tion (illustration 4).
Then replace the casing cover and slide it in the direction of the SOS
button until it engages.
Note: The telephone can be operated without a memory card. In
this case, however, the memory is limited. If you wish to
take a lot of photos or record many vocal messages, the
use of a memory card is recommended. The device sup-
ports Micro SD memory cards up to 4 GB.