Numeric keypad mode
10
Numeric keypad mode
Toggling to numeric keypad mode
You may also use your Ergophone 12 as a telephone keypad. The
direct dial keys are used as numerical keys for this purpose.
Lift your telephone receiver.
You will hear the dial tone.
Press and hold the direct dial keys
designated by the star (*) and hash
(#) keys together for six seconds.
You will hear a beep. The device has
now switched to numeric keypad mode.
Replace the receiver.
To switch back to direct dial mode, simply repeat the operating
steps described above.
In addition, if need be you can label your direct dial keys with
the corresponding digit. The appropriate digit is denoted below
the key on the telephone.
Making a call with numerical keys
Lift your telephone receiver.
You will hear the dial tone.
Press the desired digit on the Ergo-
phone 12.
The digit you press will be dialled.
