7
Infrared Control Module MagicAir
Do not install near any heat sources such as radiators, heaters, or stoves. Do not
place the base station near radiators of household appliances (for example, speakers,
refrigerators, etc.).
Place USB-cable so that it does not twist, jam or bend excessively. Do not leave it in
places accessible for children or pets.
5.3. Electrical connection
Connect the IR module to the power supply unit via a cable with standard
USB-A — micro USB outputs.
Power supply of IR module: 5 V , 1 A. Network parameters for connecting the
power supply unit: 100–240 V, 50/60 Hz.
WARNING!
Do not use extension cords for the USB cable, do not
connect the device to the USB port of a personal computer or other
household or office equipment, and do not use power supplies with
fast charging function.
Low power supply voltage and current can cause interruptions in
the operation of the device and the failure of the control system.
Over-voltage or over-current may cause the device's control system
to fail or become a fire hazard.
The device does not have a power-off module. If you need to disconnect the device,
simply disconnect the power cable from the micro USB connector or the USB-A
connector of the power supply.
5.4. Adding the IR module to the MagicAir system
To use the device for its intended purpose, you must have a MagicAir base station.
In the MagicAir mobile app, go to the "Home settings" page. Click Add in the "Available
devices" line. Select the IR module in the drop-down list.
Follow the instructions in the mobile app. After successful configuration of the IR
module, it is possible to control the air conditioner via the MagicAir system. Your air
conditioner is now integrated into the MagicAir system and ready to use.
You can find more information about configuring the IR module in the "About MagicAir"
section of the MagicAir mobile app.
Restart the process if errors occur during setup. Please contact the service center if
the error occurs again.
