Tion IQ 400, User Manual

Page: 9 / 88

9
Real-time Air Quality monitoring mode
helps to assess air quality:
green = good, yellow = moderate,
red = bad
Monitors air decontamination efficiency.
Green light: high decontamination efficiency.
No light: filter needs changed
Push Lock and hold for at least
3 seconds, to block/unblock the purifier
controls
Displays current pairing status
via the mobile app (p. 9).
To begin pairing, hold Power for 3+ seconds;
the light will start blinking. When paired
successfully: the light is on without blinking
When the Filter light is not on, the filter has
sufficient useful life left. When the indicator is
red, replace the filter and reset the counter.
To do so, turn the device on. Press and hold
the Filter button for 3 seconds.
You will hear a beep and the counter will reset
to 180 days
You will hear a sound when the filter
life has been reset
On: press the Power button
Off: press the Power button
To change the purifier's speed, move the
slider with your finger. Right to speed up,
left to slow down
Press Auto for the purifier to function
on its own, depending on the air quality
in the room
Press Light several times
to select the mode:
Daytime: panel brightness 100%
backlight: off, sound: on
Evening: panel brightness 50%
backlight: off, sound: on
Night-light: panel brightness 0%
backlight: on, sound: off
Sleep: panel brightness 0%
backlight: off, sound: off
Automatic mode
Light mode selection
Air quality monitor Decontamination efficiency monitor
Control panel locking
Mobile device pairing monitor
Filter life. Counter reset
*with sufficient air quality, the purifier may go into
sleep mode (rate 0)
AirQuality BioSafety feature
Lock
Pairing
Filter
Turning on/off
Speed control slider
Auto
Light
Informing
Controls
EN