Tinytag Transit 2, Manual

Page: 4 / 16

4
W A R N I N G S
•
If this equipment is installed or used in a manner not specified by the manufacturer
then the protection provided by the equipment may be impaired.
•
This equipment contains a lithium battery. Danger of explosion if the battery is
incorrectly fitted. Do not cut open, incinerate, recharge or expose to temperatures in
excess of 100°C (212°F).
•
The battery should be replaced by a trained technician using the battery supplied in
the appropriate manufacturer’s service pack.
•
This equipment should only be interfaced to a UL or CSA listed computer with RS232
levels of not more than ±12V.
•
This equipment should only be interfaced to equipment which is powered by a Safety
Extra Low Voltage Supply. The maximum voltage levels are to be 30V rms, 42V peak
or 60Vdc and separated from hazardous voltages by double or reinforced insulation.
For the United States consider a Safety Extra Low Voltage Supply to be a Class 2
source as defined in the National Electrical Code. If the unit is connected to a
computer outdoors the computer must also comply.
•
This equipment should be used within the temperature range and other
environmental conditions specified in this manual.