7
6
Insert front tube seat frame into the plastic
mouldings of the seat support frame assembly
according to the direction of the arrows, make
sure all tubes are installed properly. Ensure the
corresponding tube labelled ‘E’ is aligned with the
‘E’ on the seat support frame assembly.
Connect the lower boom tube into the swing tube
on the main module with toy arm. Ensure that
you hear a ‘click’ allowing the pop-pins to engage
securely.
Then use a 17mm screw to lock the tubes together
as a secondary locking device.
Ensure that you hear the pop-ins click once
engaged in holes in the plastic mouldings. After
completing the installation, the seat frame direction
is downwards as shown in the diagram.
Insert left leg tube unto left support tube, ensuring
that the label ‘A’ on each tube aligns as per diagram.
Repeat previous step for the right leg tube, ensuring
that the label ‘B’ on each tube aligns as per diagram.
Install the lower boom tube to the bottom of the
seat support frame using two 27mm screws, and
two 22mm screws to secure in place.
Insert left support tube into the left tube of the main
module with toy arm, ensuring that the label ‘C’ on
each tube aligns as per diagram.
Repeat previous step for the right support tube,
ensuring that the label ‘D’ on each tube aligns as
per diagram.
Install the seat pad to the seat support frame
assembly by placing the seat tubes into the seat
fabric pockets on the underside.
Place the snack tray side clips over seat support
frame assembly in the direction of the arrows shown
in the second picture of diagram
To release the snack tray, pull side clips of the snack
tray outwards and lift upwards.
Assembly / Operating Instructions
Assembling Seat Frame
PLEASE NOTE: You may need the help of another adult.
1.
1.
2.
2.
1.
3.
2.
3.
4.
5.
Assembly / Operating Instructions
Assembling Swing
Installing seat frame assembly
to support frame assembly
22mm
27mm
22mm screws
C
A
c
A
c
D
B
B
D
D
