6W/12W LED Downlight
(back side)
6W LED Downlight
Model :
TD0
1
12W LED Downlight
Model :
TD0
2
To reduce the risk of electric shock, Please ensure the power is not connected when
you install the downlight. Even though the light body is cold to touch shortly after normal
operation, please be careful when handling the metal cooling ns as they may contain
sharp edges. Always hold the light by the acrylic part. If the light is damaged, please
seek professional electrical assistance, or please discard the light.
Safety guide
Match method :
Switch off the power, then switch on power again, immediately short press on/off key
(single zone remote) or zone key(multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
Delete match :
Switch off the power, then switch on power again, immediately short press on/off key
(single zone remote) or zone key(multiple zone remote) 5 times on the remote.
The light blinks 5 times means delete all matched remote.
Controlled by wireless 2.4GHz remote control
RGB+CCT Handhold remote
RGB+CCT Wall mounted remote
Page 1
1. This product is suitable for the ceiling-mounted installtion.
2. Please open the hole on the ceiling according to the correct size of hole(Diagram 1).
3. Connect the driver properly according to the wire connection(Diagram 2),
and then put the driver and wire into the ceiling from the hole.
4. Push in the two spring elements, make sure that they are deployed and anchored
on the back of the ceiling.
LED downlight installtion
Enter android market / App Store,Search "SkySmart" application software
,
download and install
.
WiFi Relay
Controlled by smart phone APP
Diagram 1
Hole size
150mm (12W)
100mm (6W)
Diagram 2
Ceiling
Driver
(Controller inside)
RGB+CCT
TD01/TD02 Smart RGB+CCT LED Downlight
