Tintometer 15150001, Instruction Manual

Page: 15 / 176

XD 7500 Commissioning
15
ba77191e01 - 71310060 04/2018
3 Commissioning
3.1 Scope of delivery

Spectrophotometer XD 7500

Power pack with connection cable

Buffer batteries 4 x AA alkaline manganese (Mignon)

Two zero cells (16 mm and 24 mm, round)

Four cells 24 mm, round

Five plastic stirring rods, 13 cm

Compact instructions (5 languages)

Brief instructions (27 languages)

USB stick with
– Brief instructions (27 languages)
– Detailed operating instructions (8 languages)
– Current version of firmware and method update
– Method manual
Packing This photometer is sent out in a protective transport packing.
CAUTION
Keep the original packing including the inner packing to protect the in-
strument against hard shocks if it has to be transported.
The original packing is also required for the proper return of the instru-
ment if it has to be repaired.
Note that damage caused by improper transport voids all warranty
claims.
3.2 General notes on handling
Always protect the meter from conditions that could damage the mechanical,
optical and electronic components. Heed the following points especially:

The temperature and humidity during operation and storage must be
within the limits specified in Chapter 7 T
ECHNICAL DATA
.

The following influences always have to be avoided with the meter:
– Extreme dust, moisture and wetness
– Exposure to intensive light and heat
– Fumes that are corrosive or contain high concentrations of solvents.

For measuring, the meter must be placed on a flat surface.

Spilled liquid or other material should be removed immediately (see Sec-