Tintometer 15150001, Instruction Manual

Page: 117 / 176

XD 7500 Operation
117
ba77191e01 - 71310060 04/2018
4.11.9 Erasing stored measurement datasets
If you no longer need any stored measurement datasets, you can erase them
individually or altogether.
Erasure functions The following erasure functions are available.
The Measurement data memory
list is displayed.
The filter settings used last are
active.
<HOME>
Concentration ,
Absorbance / % Transmission ,
Special / Multi wavelengths
– [Setup]
– Measurement data
memory
Measurement data memory 16.01.17 9:52
15.01.17 14:00 3.50 mg/l Ni Administrator AutoStore
15.01.17 14:05 3.64 mg/l Ni Administrator
AutoStore
15.01.17 14:10 3.69 mg/l Ni Administrator
AutoStore
15.01.17 14:15 3.72 mg/l Ni Administrator
AutoStore
15.01.17 14:20 3.72 mg/l Ni Administrator
AutoStore
15.01.17 14:25 3.75 mg/l Ni Administrator
AutoStore
15.01.17 14:30 3.73 mg/l Ni Administrator
AutoStore
15.01.17 14:35 3.80 mg/l Ni Administrator
AutoStore
15.01.17 14:40 3.78 mg/l Ni Administrator
AutoStore
Filter
?
Memory space usage: 9/
Setup Single value Delete

Erasing an individual measure-
ment dataset
1
Highlight a measurement dataset.
2
Remove the highlighted measure-
ment dataset with
[Delete] .

Delete all measurement datasets
on the list displayed
1
Open the settings menu with
[Setup] .
2
Select and confirm Delete mem-
ory (selected values only) .
All measurement datasets corre-
sponding to the current filter crite-
ria are erased.
or

Erasing all measurement datasets Select and confirm Delete mem-
ory (all values) .
All measurement datasets are
erased.