Step 11.
Find Your Phone Using a Connected Tintag
If you have lost your phone, and it is in range of an associated Tintag you can start an acoustic notification on
your phone by pressing the button on the device. You can walk around the locations where your phone running the
application might be. If you are getting close to it, as you press the button, it will signal its presence through the
sound alarm.
Figure 13: Button on Tintag
Step 12.
Leaving Tintag Detail Area
You can leave the detail area of a Tintag you are connected to by tapping the x on the upper left corner of the
window. This way you can easily go through all the Tintags associated to your phone.
Figure 14: Disconnect from Tintag
4.
Operation
The Tintag is ready to go when you get it out of its package. You will be able to connect to it as soon as you install
the mobile app. When first connecting to it, it will flash the four LEDs in the corners and it will start the buzzer
for a short period of time. This is particularly useful when you have multiple Tintags you want to connect to. After
adding it in the mobile app, it will always connect to the mobile application if within range. When the devices are
out of reach, they will automatically disconnect. However, when within range, they will automatically reconnect.
You will be able to flash the LEDs and start the buzzer from your application only if the Tintag is within range
and connected. This is also the case of the Tintag button, it will start the alert on the phone only if the application
is running and the devices are connected.
8
