TINRS Tuesday, Manual

Page: 14 / 20

Scales
Assign a new scale to any of the four slots by pressing
down the scale button when you have selected the LED
for the slot you want. Hold the
scale
button until the
selected LED starts blinking, then release the scale
button and use the
ticks
and
beats
buttons to select a
new scale by matching it to the LED patterns below. While
the
scale
LED is still blinking, you can also select a
transpose mode (see Scale Transpose Options below).
Once you are happy with your new selections, press and
hold the
scale
button again until the LED stops blinking.
You have now successfully filled a slot.
Slides off
Short notes
Slides on
Short notes
Slides off
Mixed notes
Slides on
Mixed notes
Algorithm Output Variations
While the algo LED is still blinking, you can also change
your output mode. The lit LED next to the
scale
button
determines your output mode for note length and note
slides. Select one of four options by pressing the
scale
button:
13