6
Tinplate Flying Colonel Electric Locomotive
Maintenance
The engine should be well oiled and greased in order to run properly.
Regularly lubricate all axles and linkage components and pickup rollers to prevent
squeaking. Use light household oil, such as that found in M.T.H.'s
maintenance kit. Do not over oil. Use only a drop or two on each
pivot point.
DO NOT
OVER OIL
Figure 3
The locomotive’s internal gearing was greased at the factory and should not need
additional grease. However, it will be necessary to lubricate the idler gears located next
to the drive wheels with grease every 25 hours of operation. Follow the greasing points
illustrated in Figure 4.
Lubricating and Greasing Instructions
Figure 4
Lube Pickup Rollers (L)
Lube Wheel Axles (L)
Lube Bushings (L)
Grease Idler Gear (G)
