manualshive.com logo in svg

Tinplate Traditions No. 9, Operation Manual

Share
Download
Tinplate Traditions No. 9 Operation Manual Download Page 10

Maintenance

Lubricating and Greasing  Instructions

The engine should be oiled and greased in order to run properly.

Regularly lubricate all axles and linkage components and pickup rollers to 
prevent squeaking.  Use light household oil, such as that found in M.T.H.'s 
maintenance kit.  Do not over oil.  Use only a drop or two on each pivot 
point.

The locomotive's internal gearing was greased at the factory.  Grease engine every 50 
hours of use or at least once yearly if engine is not run.  Use a lithium based grease 
and follow the greasing instructions.

10

Tinplate No. 9 Freight Set with Proto-Sound® 2.0

DO NOT

OVER OIL

DO NOT

OVER OIL

DO NOT

OVER OIL

Remove the two Contact Plate mounting screws from the ends of the motor frame then lift the Contact Plate 
off the motor frame. 

 

STEP

1

1

Contact Plate 

Mounting

Screw

Drive Gear

Worm Gear

STEP

2

2

Flat Contact Plate

!

L

ubricate the Drive 

Gear and Worm Gear 
with White Linthium 
Grease. Make sure  that 
when replacing Contact 
Plate that the Plunger 
Pin makes contact with 
the Flat Contact plate. 

Lubricate Axles

Lubricate Pick-Up Rollers 

Idler Gears

Contact Plate 

Mounting

Screw

Plunger Pin

Summary of Contents for No. 9






















Reviews:

No comments

Brands by name

Popular brands

Load more brands