STEP 5
1. Glue and clamp as shown to create the
Gate
.
2. Repeat steps 1-5 to create the other half of the gate assembly.
NOTE:
Do not glue the gate into the wall structure. This is a sliding gate.
STEP 6
1. Fold, glue, and clamp pieces as shown.
2. Glue both d4 pieces to each side of piece d1 as shown making sure that the d4 pieces are aligned to the top edge of piece d1.
3. Attach piece d2 and d3 to the d1 assembly to create a
stanchion
.
