Note:
*
Note :
Before the first use, please charge the appliance for 3-4 hours (refer to “Charging Instructions”
for details).
Based on results from Tineco lab tests. Lab temperature 39.2°F (4
℃
) ~ 104°F (40
℃
)
Use directly when you just need to absorb water; add water/solution when you need to
deep clean the floor (refer to “Filling Clean Water Tank Operation” for details).
Switch ON to start the machine.
Press Spot button for spot mode to remove tough spots
and stains with higher speed and stronger spray.
Place the appliance on the storage tray vertically after use.
Do not recline the appliance over than 144° to against
water leakage.
Squeeze the Solution trigger when moving backward
to spray liquid as needed.
*Do not use for absorbing foam liquid.
*When cleaning excessively dirty, press Spot button for Spot mode.
Product Operation
<144°
Summary of Contents for iFloor
Page 1: ...OFF Spot ON BC...
