Tineco 14120157 Instruction Manual Download Page 5

3

IMPORTANT! Always switch off the cleaner before cleaning, when 
not in use or attempting any maintenance task. The charger must 
only be connected to an AC power supply at the voltage shown on 
the rating label. This cleaner should only be used for its intended 
purpose as described in this instruction manual. Never operate the 
cleaner without filters.

When using your vacuum cleaner, basic 
precautions should always be observed, 
including the following; 

1. 

This appliance is not intended for use 
by persons (including children) with 
reduced physical, sensory, mental 
capabilities or lack of experience 
and knowledge, unless they have 
been given supervision or instruction 
concerning use of the appliance by a 
person responsible for their safety.

2. 

Children should be supervised to 
ensure that they 

do not

 play with the 

appliance.

3. 

To prevent electrical shock, 

do not

 

immerse the appliance, battery or 
power plug into water or other liquids.

4. 

To prevent electrical shock, 

do not

 use 

the vacuum cleaner outdoors or on wet 
surfaces.

5. 

Always check the power cord before 
use, the power cord and the power 
adapter should be in a good condition 
and 

must not

 be damaged. If the 

power cord or the charger adaptor 
is damaged or defective, it must be 
replaced.

6. 

The appliance and charger are intended 

for domestic indoors use only.

7. 

Do not 

unplug the charger by pulling 

on the power cord. To unplug, grasp 
the power adapter, not the power cord 
and gently pull the power adapter from 
the power socket.

8. 

Do not 

handle or operate the appliance 

with wet hands. Follow electrical safety 
precautions at all times.

9. 

Do not 

attempt to change the 

attachments while the appliance is 
switched on. Use only manufacturer’s 
recommended accessories.

10. 

Do not

 operate the vacuum cleaner too 

close to heaters, radiators and other 
hot surfaces.

11. 

Do not 

use the appliance to pick up 

flammable items or combustible liquids 
(i.e. gasoline, hot ashes, cigarettes, 
matches, explosive materials or 
anything burning) or use in areas where 
such substances and items may be 
present.

12. 

Do not

 use the appliance to pick up 

toxic materials (i.e. chlorine, bleach, 
ammonia).

13. 

 

Never

 operate or use the appliance  

without the filters in place.

Important Safety Instructions

Summary of Contents for 14120157





























Reviews: