ECO 20 Automatic Regulation of Burning
7
Indication amount of refueled wood
Shows the adequacy of the current fuel load.
Only shows once the “Burn
ing phase
” circle reaches position A.
Sound signalization
Turns the control unit’s sound alerts on or off –
see “Control Unit Sound Alerts” below.
If you turn the alerts off, the unit will no longer use sounds to notify you of important situations.
Relay status
Shows the status of devices controlled by Relay 1 (R1) and Relay 2 (R2).
•
White symbol
–
connected device is active
•
Grey symbol
–
connected device is inactive
•
R1 or R2 symbol not shown
–
no function was assigned to the relay in question
Menu
Open burn regulation settings, see “Menu” below.
“
Burning phase
“ circle
•
Maximum burn point
–
A.
•
Refueling point (with sound alert)
–
B
START button
Press to start a new automatic burn control cycle. Details see “Start Burn Control” below.
SDS activity
The SDS label indicates activity of the Software Door Sensor. When the SDS label shows, the unit
is checking exhaust temperature for changes. When an exhaust temperature change occurs
(indicating open door / refueling), the SDS starts a new burn cycle.
If the SDS isn’t performing properly (a new burn cycle does not start when refueling, or new
burn cycles spontaneously start even though you haven’t refueled), try adjusting SDS sensitivity
in Settings.
Shutter position
The current position of the external air intake (EAI) shutter
•
100% = EAI shutter fully open
•
0% = EAI shutter fully closed
Status bar
Shows whether the app is connected to a control unit.
