4 x footrests
8 x rubber rings for fixing
the footrests
4x mounting plates for
the table legs
4x cross bolts for fastening
the seat plates
4x screw C
(6 x 50mm)
8x screw B
(6 x 40mm)
16x screw A
(6 x 35mm)
allen key
ALL PARTS FOR THE ASSEMBLY OF TAVI
screw A
screw B
mounting plates
ASSEMBLY INSTRUCTIONS
Place the two table tops on a clean,
solid surface. Put on the black ring and
fix it with the
8 screws B (6 x 40mm)
.
Insert the table legs. Put the 4 mounting
plates through the table legs and fix
them with the
4 screws A (6 x 35mm)
.
Slide in the seats. Insert the cross bolt
nut in the hole - with the slot vertical
(see picture). Fasten the seats with the
screw C (6 x 50mm)
.
Insert the 4 round rods of the footrests
at the required height and fix each with
a rubber ring.
FINISHED!
IMPORTANT! Please make sure you are using the correct screws!
Please check the screws regularly for tightness!
screw C