COUNTDOWN TIMER
A. Press
MODE
until TIMER appears.
B. Press
SPLIT/RESET
to select timer operation (Countdown and Stop; Countdown and Repeat;
Countdown and Start chrono).
C. Press
SET
. HOURS digits will flash. Press
SPLIT/RESET
to advance digits.
D. Press
MODE
to select TENS of MINUTES. Press
SPLIT/RESET
to advance.
E. Repeat to set MINUTES, TENS of SECONDS, and SECONDS.
F. Press
SET
when done.
G. Press
START/STOP
to start timer.
H. Press
START/STOP
to pause, press again to resume.
I. When timer is stopped, press
SPLIT/RESET
to reset timer.
Watch will beep when countdown reaches zero.
ALARM AND CHIME
A. Press
MODE
until ALARM appears.
B. Press
SET
to select HOURS. Digits will flash.
C. Press
SPLIT/RESET
to advance digits. Go through 12
hours for AM or PM.
D. Press
MODE
to select TENS of MINUTES.
E. Press
SPLIT/RESET
to advance. Repeat for MINUTES.
F. Press
SET
when done.
G. Press
START/STOP
to turn alarm on or off.
H. Press
SPLIT/RESET
to turn chime on or off.
When alarm time is reached, watch will beep for 20 seconds, or until any button is pushed.
Alarm will repeat every 24 hours until deactivated.
INDIGLO® NIGHT-LIGHT WITH NIGHT-MODE® FEATURE
A. Press
INDIGLO
to activate light. Patented (U.S. Patent Numbers 4,527,096 and 4,775,964)
electroluminescent technology used in the INDIGLO® night-light illuminates watch face at
night and in low light conditions.
B. Press and hold
INDIGLO
for three seconds (beep will sound) to activate or de-activate
NIGHT-MODE® feature.
C. While in NIGHT-MODE® feature, press any button to illuminate watch face for 3 seconds.
Chime on
Alarm on
If your watch is water-resistant, meter marking or (
) is indicated.
Water-Resistance Depth
p.s.i.a.* Water Pressure Below Surface
30m/98ft
60
50m/164ft
86
100m/328ft
160
*pounds per square inch absolute
WATER AND SHOCK RESISTANCE
WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS UNDER
WATER.
1.
Watch is water-resistant only as long as lens, push buttons and case remain intact.
2.
Watch is not a diver watch and should not be used for diving.
3.
Rinse watch with fresh water after exposure to salt water.
4.
Shock resistance will be indicated on the watch face or caseback. Watches are designed to
pass ISO test for shock resistance. However, care whould be taken to avoid damaging crystal.
FASTWRAP® STRAP ADJUSTMENT
