2
W-194
www.timex.com
When a mode is on,
T
appears below mode name on display. If
you hide a mode, you can turn it back on later using procedure
above.
Press
START·SPLIT
once and hold to see 2nd time zone. Press
START·SPLIT
twice and hold to see third time zone. Continue to
hold button for 4 seconds to switch to displayed time zone.
Press and hold
STOP·RESET
to see next upcoming occasion (see
description of Occasion mode). Release and immediately press and
hold again to see subsequent occasions.
CHRONOGRAPH
This mode provides a chronograph (stopwatch) function. Press
MODE
to go to Chrono mode.
To start, press
START·SPLIT
. Chrono counts up by hundredths of a
second up to one hour, then by seconds up to 100 hours.
Stopwatch icon
w
flashes to indicate chrono is running.
To stop, press
STOP·RESET
. Stopwatch icon
w
freezes to indicate
chrono is stopped.
To resume, press
START·SPLIT
, or to reset (clear) chrono, press
and hold
STOP·RESET
.
Chrono continues to run if you exit mode. Stopwatch icon
w
appears in TIME mode.
While chrono is running, press
START·SPLIT
to take a split. Lap and
split times will be displayed with lap number.
Lap and split times are stored in memory until a new workout is
started (chrono started from zero).
To recall split times during or after workout, press
SET·RECALL
.
Then, press
+
or
–
to step through splits. Press
DONE
to exit.
To set display format, press
SET·RECALL
while chrono is reset.
Then, press
+
or
–
to select desired format. Press
DONE
to exit.
NOTES:
• When a split is taken, times are frozen on the display for 10
seconds. Press
MODE
to release display and show running
chrono immediately.
• Press
NEXT
to switch between recall and format setting.
TIMER
Timer mode provides a countdown timer with alert. Press
MODE
repeatedly until TIMER appears.
To set countdown time:
1) Press
SET·RECALL
. Hours flash. Press
+
or
–
to change hours;
hold button to scan values.
2) Press
NEXT
. Minutes flash. Press
+
or
–
to change minutes.
3) Press
NEXT
. Seconds flash. Press
+
or
–
to change seconds.
4) Press NEXT. Action at end of countdown flashes. Press + or –
to select STOP or REPEAT, indicated by hourglass icon with
arrow
h
.
5) Press
DONE
at any step when done setting.
To start timer, press
START·SPLIT
. Timer counts down every sec-
ond from countdown time. Hourglass icon
H
flashes to indicate
timer is running.
To pause countdown, press
STOP·RESET
. Hourglass icon
H
freezes to indicate timer is stopped.
To resume countdown, press
START·SPLIT
, or to reset countdown,
press
STOP·RESET
.
Watch beeps and night-light flashes when countdown ends (timer
reaches zero). Press any button to silence. If REPEAT AT END
selected, timer repeats countdown indefinitely.
Timer continues to run if you exit mode. Hourglass icon
H
appears
in Time mode.
LAP 1 = 7.11
LAP 2 = 7.50
SPLIT 2 = 15.01
LAP 3 = 7.08
SPLIT 3 = 22.09
LAP 4 = 7.30
SPLIT 4 = 29.39
SPLIT 1 = 7.11