Installation and Maintenance
Installation
1. Remove the unit and all packing materials from the carton. You should save packing materials in case unit needs to
be returned for service. If you do not wish to save the materials, please dispose of them properly.
2. Place the unit on a stable, level surface, close to an AC outlet, out of direct sunlight, and away from sources of dust,
dirt, heat, water, moisture, vibration, and strong magnetic fields.
3. After installing the batteries (see below) and reading the Maintenance notes, plug the AC cord into an outlet.
“Sure Alarm” Battery Backup Installation
It is recommended that 3 “AA” batteries be installed into the unit, as directed below, to activate the “Sure Alarm” battery
backup feature. In the event that the AC power cord is disconnected or a power failure or other interruption occurs, the
“Sure Alarm” system will maintain clock and alarm settings for the life of the batteries, ensuring that the alarm will sound
at the set time (note: while operating on battery power, all set alarms will sound as a buzzer). When power is restored, the
clock will cease using battery power, and will again operate on AC power. The Battery Low Indicator shows if there is not
enough battery power to run the backup.
To install backup batteries:
1. Gently turn the unit over and remove the battery compartment door.
2. Install 3 “AA” batteries (alkaline is recommended for longer life) into the battery compartment.
Please make sure the polarity is correct as shown within the battery compartment.
3. Put the battery compartment door back on, making sure the door locks into place, and
gently return the unit to its upright position.
Maintenance
1. Place the unit on a level surface away from sources of direct sunlight or excessive heat.
2. Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material
should be placed between it and the furniture.
3. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine,
thinner or similar materials can mar the surface of the case.
4. If the unit is not to be used for a prolonged period, such as a month or longer, remove the batteries to prevent possible
corrosion. Should the battery compartment become corroded or dirty, clean the compartment thoroughly and replace
the batteries.
4
Battery Compartment