Timex T331, User Manual, Page: 10 / 14

6
To Recall A Preset Station
Tune to the desired band and then press the CLOCK / PRESET / PAIR button to scroll through the 10 preset memories to find your
desired station.
To Change A Preset Station
1. Tune to the new station that you want to store.
2. Press and hold the CLOCK / PRESET / PAIR button until the Preset Number indicator begins flashing.
3. Press the HOUR /
or MIN / button until the preset number that you want to change is flashing in the display.
4. Press the CLOCK / PRESET / PAIR button once more. The new station is entered into the preset memory number that you selected
and the previous station is deleted.
Bluetooth Feature
This Timex clock radio includes a Bluetooth receiver that allows you to wirelessly stream music to the radio from your Bluetooth enabled
smartphone, tablet or music player from up to 10 meters (approximately 33 feet) away. You may also wake up to the music stored on
your Bluetooth enabled device as long as your device has been properly paired with this Timex clock radio and is within the 10 meter
transmission range. You may also use the Sleep Timer on this Timex clock radio to fall asleep to music from your Bluetooth enabled
device for up to 90 minutes and then the unit will shut off automatically.
Pairing and Playing Your Bluetooth Enabled Device
1. Make sure that your Bluetooth enabled device is turned ‘on’ and placed in the Pairing Mode. The screen on your phone may show
any previously paired devices as well as any new devices that are ‘in-range’ and ‘discoverable’.
2. Press POWER/MODE/ALM RESET button and select the BT mode on your Timex clock radio until the display briefly shows “ bt ”,
two ‘beeps’ are heard and the Bluetooth indicator begins slowly flashing in the upper right corner of the display. This indicates that your radio
is in Bluetooth mode.
3. Press and hold the CLOCK / PRESET / PAIR button until the Bluetooth indicator begins to flash rapidly. “Timex T331” should appear
on your device’s display along with the words “Not Paired” or similar message. Tap on that message to complete the pairing process.
The screen on your device will now show “Timex T331 Connected” and you will hear a single ‘beep. The Bluetooth indicator stops
flashing and remains ‘On’. This indicates that your device and your clock radio are properly paired and you can begin streaming
music wirelessly from your device to your clock radio.
4. Use the controls on your Bluetooth device to select the music you wish to hear and to control the volume as usual. It may be
necessary to adjust the volume level on your clock radio as well. Press the CLOCK / PRESET / PAIR button to play/pause Bluetooth
music. The music from your Bluetooth device will play through the speaker of the clock radio.
Operating Instructions
BT BT