10
Operating the Radio
1. Press the
1
Radio On/Sleep Button
once to turn on the radio.
Note:
If the
1
Radio On/Sleep Button
is pressed more than once, the unit will enter the sleep mode, with
the radio operating on a timer. See
Sleeping to the Radio Using the Timer
for more information about this feature.
2. Press the
5
Radio Band Button
to select the AM band or one of the two FM bands. The
Radio Band
Indicator
will show which frequency is in use.
3. Press the
4
Reverse
and
8
Forward Buttons
to tune into a radio station. To scan the stations, hold a
button for about three seconds. The radio will rapidly advance to the next strong signal.
4. You may also use the
6
Memory Set Buttons
to select a preset radio station. See the
Programming Radio
Station Memories
section for instructions on programming radio station settings.
5. Rotate the
9
Volume Thumbwheel
to adjust the volume level.
6. Press the
2
Off/Reset Button
to turn the power off.
Programming Radio Station Settings
This Alarm Clock Radio features a total of 18 programmable radio settings: 12 FM stations and six AM stations.
These allow you to preset your favorite stations and access them quickly.
1. Press the
1
Radio On/Sleep Button
once to turn on the radio.
2. Press the
5
Radio Band Button
to select a radio band. The
AM/FM Radio Indicator
will show which
band is in use.
3. Press the
4
Reverse
and
8
Forward Buttons
to find a station to program into the memory.
4. When you have reached the station you wish to program, press and hold one of the six
6
Memory Set
Buttons
until you hear a beep. The radio station has now been programmed into that preset slot, and you
can reach the station by pressing its
6
Memory Set Button
while the radio is turned on.
5. Follow the above instructions to continue programming radio station settings into the memory. You can save
a total of 18 stations using the three bands.
6. To edit a setting, enter a different radio station as an existing
6
Memory Set Button
. This overrides the
original setting.
Listening to the Radio
