![Timex T248T User Manual Download Page 6](http://html1.mh-extra.com/html/timex/t248t/t248t_user-manual_1117616006.webp)
8
Listening / Sleep to Radio
Note:
Extend FM wire antenna fully for best FM reception. Rotate the unit, as required, for
best AM reception.
1.
Press the
On / Sleep Button
on the top left to turn on the radio.
2.
Set the
Band Switch
on the right side of the unit to the desired band, AM or FM.
3. Rotate the
Tuning Control
to select a station.
4.
Press the
On / Sleep Button
again to change to sleep mode. The sleep timer will
automaticallyshut the radio off after a set time so you can fall asleep to the radio.
5.
You can adjust sleep timer from 90, 60, 30 or 15 minutes by pressing the
On /
Sleep Button
to cycle through settings. The time setting and sleep icon will be
displayed.
6.
To avoid affecting the normal alarm sound level, you can adjust the sleep volume by
pressing the
Sleep Volume Button
as desired. The Sleep Volume icon will change
to show the volume setting.
7.
To stop listening at any time press the
Power Off/Alarm Reset Button
to turn off
the unit.
Instant Weather
1.
To listen to Weather at any time, press the
Weather Button
. The
Instant Weather
LED
on the front will light to indicate you are listening to Weather Band.
2.
Set the
Weather Band Channel Selector
to the channel for your area. Adjust the
Volume Control
as desired. Weather Band Channels:
Ch1 – 162.400MHz
Ch2 – 162.425MHz
Ch3 – 162.450MHz
Ch4 – 162.475MHz
Ch5 – 162.500MHz
Ch6 – 162.525MHz
Ch7 – 162.550MHz
Note:
While listening to Weather, only the buzzer alarm will work/sound.
Note:
Extend FM antenna and adjust direction for best Weather Band reception.
Back Light Dimmer
To adjust the display back lighting brightness, press the
Snooze/Dimmer Button
for
Hi/Med/Low.
Snooze Operation
Press the
Snooze/Dimmer Button
after the alarm sounds, the alarm will go off and
will come on again in approximately 9 minutes.
You may repeat this cycle several times
during the 1 hour alarm cycle.