3
P4
Display
Installing and Replacing Backup Batteries
When lit,
indicates
Buzzer or Radio
is Alarm 2
alarm source.
If neither is lit,
Alarm 2 is not
armed
When lit,
indicates
Buzzer or Radio
is Alarm 1
alarm source.
If neither is lit,
Alarm 1 is not
armed
When lit, indicates backup
batteries should be replaced
When lit,
indicates time
displayed is PM
Time display
Your new Timex Clock Radio includes a battery backup system that will maintain the
time and alarm settings during a temporary power interruption.
1. Keep unit connected to AC power when changing batteries to avoid losing your
settings.
2. Press on the battery door locking tab to open and remove the battery door.
3. Check the correct polarity (+/ - ) markings in the battery compartment and install two
“AAA”batteries (not included).
4. Replace the battery door.
NOTE:
With batteries installed, the display will turn off during a power failure but the
clock will continue to run and maintain your alarm settings. The alarm will sound when
operating on batteries.
2
1
3
Press
