Timex IRONMAN Classic 50 Move+, Instruction Manual

Page: 13 / 460

TIMEX
®
IRONMAN
®
Classic 50 Move+ Owner’s Manual Page 12
1. From the Time of Day screen, push the Mode button until you see Review on the screen.
2. Push the Start/Split and/or Stop/Reset buttons to cycle through the review options and select
the data you want to review: ACTVTY (Daily Activity), CHRONO (Chrono Workout) and INTTMR
(Interval Workout).
3. When you have selected the metrics you want to review, push the Set/Recall button.
4. If available, the watch will list all days saved in the memory. Push the Start/Split button to scroll
through the available dates.
5. Push the Set/Recall button to access the details of that day’s data or the workout data.
6. If multiple lines of data are available, use the Start/Split and Stop/Reset buttons to view all of
the data.
7. Push the Set/Recall button to exit and view additional saved data or workouts.
NOTES:

Daily activity and interval workout data will be automatically overwritten; however Chrono
workout data cannot be overwritten. For this reason, the TIMEX Connected app has an optional
feature that erases Chrono workout files from the watch once the Chrono workout has been
transferred to the app. Please see the TIMEX Connected app section of this owner’s manual for
details.

Calorie expenditure data is not an exact number, but a general estimation. Calorie values less
than 100kcals will be displayed as whole numbers (decimals truncated, not rounded).
SYSTEM SETUP
1. From the Time of Day screen, push the Mode button until you see Setup on the screen.
2. If necessary, push the Start/Split button until you see System Setup on the screen.
3. Push the Set/Recall button to access the System Setup menu.
4. Use the Start/Split button to make your Unit selection: Imperial (in, ft, mi, lbs) and Metric (cm,
m, km, kg). Then push the Mode button to proceed.
5. Use the Start/Split button to make your Sensitivity selection:

Mid: Default setting, the most versatile setting for all general purpose usage

Low: Recommended for low intensity walking or mild jogging

High: Recommended for users with a unique gait motion (use only if other settings
do not provide favorable results)
6. Then push the Mode button to proceed.
7. Use the Start/Split button to make your Sensor selection: On (watch will track steps, distance
and calories burned) or Off. Then push the Mode button to proceed.
8. Use the Start/Split button to make your Chime selection: On (watch will chime every hour) or
Off. Then push the Mode button to proceed.
9. Use the Start/Split button to make your Beep selection: On (watch will beep with every button
press) or Off. Then push the Mode button to proceed.
10. Use the Start/Split button to make your Sync selection: Show (watch will be visible to
compatible BLE sensors) or Hide. Then push the Mode button to proceed.