Timex IRONMAN Classic 50 Move+, Instruction Manual

Page: 11 / 460

TIMEX
®
IRONMAN
®
Classic 50 Move+ Owner’s Manual Page 10
7. Push the Mode button, then push the Start/Split and/or Stop/Reset buttons to select Repeat at
End or Stop at End. When appropriate selection is on screen, push Mode button.

Stop at End should be used when you DON’T want the interval to repeat.

Repeat at End should be used when you DO want the interval to repeat.
8. If you want your interval to include more than one segment, push the Start/Split button to make
adjustments to INT 2, then push the Mode button.
9. Push the Start/Split and/or Stop/Reset buttons to adjust the hours digit.
10. Push the Mode button, then push the Start/Split and/or Stop/Reset buttons to adjust the
minutes digits.
11. Push the Mode button, then push the Start/Split and/or Stop/Reset buttons to adjust the
seconds digits.
12. Push the Mode button, then push the Start/Split button to select Repeat at End or Stop at End.
When appropriate selection is on the screen, move to step 13.

Stop at End should be used when you DON’T want the interval to repeat.

Repeat at End should be used when you DO want the interval to repeat.
13. Push the Set/Recall button to save your Interval workout settings.
14. Push the Start/Split button to start the Interval workout.
15. During the workout, repeatedly push the Set/Recall button to scroll through the following data
on the top banner: interval number, steps, distance and calories burned.
16. Push the Stop/Reset button to stop the workout.
17. To save the Interval workout, push and hold the Set/Recall button for two seconds.

If five interval workouts have already been stored in the watch memory, the oldest
stored Interval workout is deleted and the current workout data is stored.
18. To discard the Interval workout, push and hold the Stop/Reset button for two seconds.
19. To delete the latest stored interval workout, push and hold the Stop/Reset button for three
seconds. To delete all stored interval workouts, push and hold the Stop/Reset button for six
seconds.
NOTES:

Look for an hourglass icon to signify there is an interval workout running. A flashing icon means
the timer is running. A solid icon means the timer is paused.

Deleting of stored interval workouts can only be done in Interval Timer mode, Review mode is
only used for viewing stored interval workouts. See step 19 above for instructions.