Setting the Alarm to a Buzzer
The Timex AM/FM radio alarm clock can be used as an alarm. This section will
explain how to set the alarm to a buzzer. Figure 4 shows the locations of the parts
needed to set this feature.
Alarm Button
Minute Button
Power Cord
Radio/Alarm Switch
Hour Button
Figure 4.
Locations of Parts Needed to Set Alarm to Buzzer
To Set the Alarm to a Buzzer:
NOTE:
Make sure you have set the clock before using the alarm.
1.
Plug the power cord into an electrical outlet.
2.
Hold down the alarm button; then press the hour button repeatedly until you reach
the hour you want the alarm to go off.
3.
Continue holding down the alarm button; then press the minute button repeatedly
until you reach the minute you want the alarm to go off.
4.
Move the radio/alarm switch to the buzz setting. A red light that says alarm will
display in the lower left hand corner of the digital display.
8
