Quick Start Guide
1
2
3
Activation
Mounting Screw
Appearance
Installation
1. Install 120 or 86gang box into the wall.
2. Route the cables through the cable hole of
the mounting plate.
3. Secure the device mounting plate on the gang
box with two screws. (Supplied).
4. Connect the corresponding cables.
5. Align the terminal with mounting plate. Push the
terminal in the mounting plate from bottom up.
Fasten the terminal with the buckles on the plate.
4. Tighten the screws to fix the terminal on the
mounting plate and complete the installation.
The default values of the terminal are as follows:
• The default IP address: 192.0.0.64
• The default port No.: 8000
• The default user name: admin
Activating via Device
Power on and wire the network cable after installation.
You should activate the device before the first login.
After powering on, the interface will be displayed as
follows.
You can create the device password and confirm the
password to activate.
2.4-inch LCD Display Screen Indicator
Keypad
Fingerprint
Reading Module
Door Bell
Button
12V
Power Interface
USB Interface/
Reset Button
(Inside of the Cover)
Ethernet Port
Door Lock
Wiring Terminal
Alarm
Wiring Terminal
RS-485/Wiegand Wiring Terminal
Tamper-proof
Button
ESC
OK
1
2
ABC
3
DEF
4
GHI
6
MN
O
7
P
QRS
8
TUV
9
W
XYZ
0
5
JKL
Exiting Key
Direction Keys
Numeric Keys/
Letter Keys
OK Key
Editing Key
Deleting
Key
EN
Anticlockwise Rotation
[Number]
OK Next
Input Method
Device Activation
Activation Password
(
8 to 16 Characters)
Keypad Descriptions
OK Key:
Press to confirm operations. Hold the key for 2 s to enter the
login interface.
Deleting Key:
Press the key to delete the entered letter or number
.
Numeric Keys/Letter Keys:
Enter numbers or letters.Key 0 can also
represent a space key except you are using the number input method.
Exiting Key:
Press the key to exit the menu.
Direction Keys:
Press , , and
to move the cursor.
Editing Key:
Press the key to enter the number 0. Hold the key to shift
among numbers/lowercases, numbers/uppercases and symbols.
Doorbell Button:
Press the doorbell button and the doorbell rings.
Notes:
1. The pictures here are for reference only. Some models do not support card swiping
function. For details, refer to the actual products.
2. If you enable the attendance status function, the OK key, the direction key, and the
exiting key can be the shortcut key of the attendance status.
UltraFP804
Series Fingerprint Access Control Terminal
