10
1.12 Auto Off
This menu item sets an idle interval for auto switching off the machine. For idle interval,
we mean the time in which there is no user interaction.
1.13 Sensor Adjust
This menu item adjust the brightness of the sensor. You need to do the adjustment when
one of the following case happens
1. after manufacturing of the device
2. changing of the optical sensor
3. upgrading of the firmware in the device
While adjustment, you must keep dark environment of the sensor and clean the sensor.
ii.
Attendance
2.1 Attend. Set
Enable or disable the attendance TZ (time zones) function
2.2 AttendanceTZ
Attendance status is the status assigned to a period of time. For example, 08:00 to 11:00
can be set as duty on. Another example, 19:00 to 21:00 can be set to overtime on.
NU2088 allows you to set the attendance status for a time period. The available status are
as follows
1. duty on
2. duty off
3. overtime on
4. overtime off
5. in
6. out
You can define 10 attendance status time zones and each zone consists of start time (hour,
minute), end time (hour, minute) and attendance status. The device will change its
attendance status according to the time zones automatically.
No user interaction
Last interaction
Sleep mode
