X300 Instruction Manual
Chapter 4 - System Information And Security
113
4.5
Audio
X300 Mark 2
–
has two line-level audio inputs and two line level output channels via a 8-pin DIN
connector on the rear panel (Figure 12 - X300 Mark 2 Rear Panel). The two input channels record in
Stereo.
can be included in Normal Recording, Timer Recording, Alarm Recording
and SD Recording.
As the audio inputs on the X300 Mark 2 are line-level, some microphones will require the use of a
dedicated preamplifier to raise their very low levels of output to line-level.
Figure 7 X300 Mark 2 Microphones
X300-16M
–
has one mic-level audio input via the Molex connector (Figure 15 - X300-16M Rear
Connections). The X300 has a built-in microphone pre-amp.
Figure 8 X300-16M Microphone
Playback
The audio channels can be played back when viewing footage in
also be disabled during playback.
can also be used for playback via its built-in speaker. The audio signal is carried to the
Reviewer via the RJ45 cable, no other connections are necessary.
NB
: For the X300 Mark 2, playback via the Reviewer is selectable via channel 1 only, 2 only or 1 and
2.
Summary of Contents for X300 Mark 2
