The cycle Sequence will be Regular Mode, Pour-over timing Mode and Espresso Mode.
Pour-over Timing Mode
Must be in Pour-over timing Mode to turn on
Must be in Regular Mode to turn on
The cycle Sequence will be Regular Mode, Pour-over timing Mode and Espresso Mode.
Espresso Timer Mode
After the countdown is over, the weight
value will auto-tare and you can start
brewing. Timing starts as soon as the
weight begins to change (the record is
valid when more than 40s is recorded)
If the brewer is removed, the timer will stop
and the brewing time will flash. At this time, if
you put the brewer back and quick press the
timer button, it will continue weighing and
timing. Then you can quick press the timer
button again to end recording. Long press the
timer to enter standby mode.
Quick press the timer button 3 times until
an audible beep and the Auto Timing Mode
indicator lights up.
Place a brewer on the panel and add
ground coffee. Then quick press the timer
and wait for a 3-second countdown.
Quick press the timer button 3 times to
start Espresso Mode. The timer zone will
display ESP.
The Auto-brewing mode indicator A will
flash slowly for 1 second.
When you put a cup on the scale, it will
tare automatically. When the scale
detects coffee droplets landing in the cup,
timing will start automatically.
When brewing is over and the cup is
removed, timing and weighing both stop
automatically and the recorded values will
flash. The values will then automatically
clear and return to the initial state of
displaying ESP and 0.0.
