Timeguard LED88N Installation & Operating Instructions Manual Download Page 2

Page: 2 / 8

1. General Information

These instructions should be read carefully in full before installation, and retained
for further reference and maintenance.

2. Safety

• Before installation or maintenance, ensure the mains supply to the luminaire

is switched off and the circuit supply fuses are removed or the circuit breaker
turned off.

• It is recommended that a qualified electrician is consulted or used for the

installation of this luminaire and install in accordance with the current IEE
wiring and Building Regulations.

• Check that the total load on the circuit including when this luminaire is fitted

does not exceed the rating of the circuit cable, fuse or circuit breaker.

3. Technical Specifications

•  230V AC 50 Hz
•  This luminaire is of class II construction and must not be earthed
•  6.5W LED Non replaceable lamp
•  Energy efficiency:

Class A+

• Energy Usage:

6.5kWh/1000H

• Lumen Output:

500lm

• Beam Angle:

90º x 90º

• Colour Temperature:

3700K – 4200K

• Operating Temperature:

-20°C to +40°C

•  IP55 Rated suitable for restricted external applications
•  CE Compliant
•  Dimensions:

H= 205mm W= 108mm D= 63.5mm

Summary of Contents for LED88N








