5
6
6.1 Setting the Clock
NOTE: Pauses of 15 seconds or more
during programming will result
in automatic return to the main
operating screen.
1. To prepare the module for programming
clear the memory by pressing both the
Set and Day buttons simultaneously until
the display disappears. On releasing the
buttons the display will show 0:00 INT
with the colon flashing.
2. To set the current time press the Set button
briefly and release, the display shows
0:00
INT
with “C” flashing at the right of the display.
3. Press the Day button until the black dot
indicates the current day of the week (1–7).
1 = Monday, 2 = Tuesday, and so on.
4. Use the Hrs button to set the hours followed
by the Mins button to set the minutes to the
current time of day. Rapid selection can be
achieved by continuously holding down either
the Hrs or Mins buttons.
5. If the Set button is now pressed briefly and
then released, the display will return to the
current time of day with the colon flashing.
The module is now displaying the main
operating screen.
