Set the RF Country/Area
Your :pulse uses radio (RF) to communicate with other Timecode Systems devices in
a BLINK network. It only uses our proprietary RF protocol for sending and receiving
timecode data. The regulations for the use of radio frequencies vary in different
countries, so it is important that you set your :pulse to use the correct frequencies
for the
country in which is it being used
.
Note:
The
RF Country/Area
setting does not apply to :pulse units sold in
North America and Canada. If you purchased your :pulse in the US or
Canada and wish to use it in another country, please contact Timecode
Systems. We can provide you with a
free updater
application that will
allow you to set the country/area.
To set the RF country/area:
1. Switch on your :pulse unit (see
Switch :pulse On and Off on page 50
).
2. Press the control knob.
3. Turn the control knob to scroll to the
System Settings
option.
4. Press the control knob.
5. Turn the control knob to scroll to the
Set RF Country/Area
option.
6. Press the control knob.
7. Turn the control knob to select the appropriate area:
l
Europe/UK
l
Japan/China
l
US/CA/AU/NZ
(for USA, Canada, Australia, or New Zealand).
Note:
If you want to use your :pulse in another region, please
contact Timecode Systems for advice.
8. Press the control knob.
Your :pulse will now communicate using radio frequencies that are appropriate for
the region you selected.
52
:pulse User Guide
Summary of Contents for mini basestation
Page 6: ...6 pulse User Guide ...
Page 106: ...Word clock 11 67 Standards 15 106 pulse User Guide ...
Page 107: ... pulse User Guide ...
