Page 14 of 1
5
Stage
20
NOTE
: Before moving the slat frame,
mattress must be placed on the slats or the speed of upward
movement is very high and may cause injury. Lift frame with the hand-strap then slowly push down
ensuring the edges are aligned with the side panels. If not aligned, check bed is still square (see Step 4).
Depending on the weight of the mattress, the speed of the lift will vary so be careful until you get used to
the speed. Always use the strap to lift or lower the frame - keep fingers well away from the moving parts.
NOTE: With mattress in place, move the frame up & down five times to lubricate the pistons.
Note: Be very careful what
you store under the bed -the top of
an item, like a suitcase or a box, must not touch the slats or
they shall be damaged. Maximum storage height is 260mm.
