background image

GB3

Important Safety Instructions

1.  Read these instruction.

2.  Keep these instruction.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water
6.  Clean only with dry cloth.
7.  Do not block any ventilation openings. Install in accordance with the 

manufacturer’s instructions.

8.  Do not install near any heat sources such as radiators, heat registers, 

stoves, or other apparatus (including amplifiers) that produce heat.

9.  Do not defeat the safety purpose of the polarized or grounding-type 

plug. A plozrized plug has two blades with one wider than the other. 
A grounding type plug has two blades and a third grounding prong. 
The wide blade or the third prong are provided for your safety. If the 
provided plug does not fit into your outlet, consult an delctrician for 
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly 

at plugs, convenience receptacles, and the point where they exit 
from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by 

the manufacturer, or sold with the apparatus. When a cart is used, 
use caution when moving the cart/apparatus combination to avoid 
injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for 

long periods of time

14. Refer all servicing to qualified service personnel. Servicing is required 

when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been exposed to 
rain or moisture, does not operate normally, or has been dropped.

Safety

INFORMATION TO THE USER

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: 

(1) this device may not cause harmful interference, and (2) this device must 

accept any interference received, including interference that may cause 
undesired operations.

WARNING

Changes or modifications not expressly approved by the manufacturer could  
void the user’s authority to operate the equipment.

“CAUTION : Exposure to Radio Frequency Radiation.

Antenna shall be mounted in such a manner to minimize the potential for hu-
man contact during normal operation. The antenna should not be contacted 
during operation to avoid the possibility of exceeding the FCC radio frequency 

exposure limit. The minimum separation distance of 20cm from the antenna to 

the body of user required.”  

WARNING

To reduce the risk of fire or electric shock, do not expose this product to rain or 
moisture.
The apparatus shall not be exposed to dripping or splashing and no objects filled 
with liquids, such as vases, shall be placed on the apparatus.
To prevent malfunction caused by temperature, do not use the product in a 
closed space with less than 3 inches of clearance from the right/left/top of the 
product.

Summary of Contents for TCI-100











Reviews: